Power & Hand Tools

Concrete Chisel With Bi-Material Hand Guard

Circlip Pliers

Circlip Pliers

Circlip Pliers

Circlip Pliers

Circlip Pliers Set

Circuit Tester

CIRCULAR SAW-ARGMTCS1400

Multipurpose dustpan brush Set

Norton’s Infiltrated High Density technology (i-HDTM) combined with its patented diamond blades laser-welding process is the biggest breakthrough in diamond tools this century. Through many years of research and development this revolutionar process delivers unrivalled performance, increased safety , lower energy manufacturing and a wide choice of segment design. Infiltration achieves high uniform density across each whole segmen t without applying high pressure. This allows Norton Clipper to manufacture extremely robust segments that wear evenly, remain intact and perform wel l at higher cutting speeds. The diamond grit is an integral part of the segment structure. During the patented process a special bond impregnates the core structure and binds the diamond grit into the segment. This ensures optimum use of the diamond grit, giving the diamond tools a long product life The Pro 4x4 Explorer range is even better than before. Faster cutting, longer life, improved safety and greater comfort when used on any material are all additional benefits of this blade. • Multipurpose blade cuts all materials. • Up to 12mm segment height for more cuts per wheel. • Trapezoid shaped segments give a comfortable, smoother cut with lower vibration levels. • Patented cut depth indicator allows better visibility of cut depth when in use. • Keep track of segment wear with the specially engraved wear indicator. • Patented drop shaped gullets prevents fatigue cracks even when cutting thick metal.

The Pro 4x4 Explorer range is even better than before. Faster cutting, longer life, improved safety and greater comfort when used on any material are all additional benefits of this blade. • Multipurpose blade cuts all materials. • Up to 12mm segment height for more cuts per wheel. • Trapezoid shaped segments give a comfortable, smoother cut with lower vibration levels. • Patented cut depth indicator allows better visibility of cut depth when in use. • Keep track of segment wear with the specially engraved wear indicator. • Patented drop shaped gullets prevents fatigue cracks even when cutting thick metal. Norton’s Infiltrated High Density technology (i-HDTM) combined with its patented diamond blades laser-welding process is the biggest breakthrough in diamond tools this century. Through many years of research and development this revolutionary process delivers unrivalled performance, increased safety, lower energy manufacturing and a wide choice of segment design. Infiltration achieves high uniform density across each whole segment without applying high pressure. This allows Norton Clipper to manufacture extremely robust segments that wear evenly, remain intact and perform well at higher cutting speeds. The diamond grit is an integral part of the segment structure. During the patented process a special bond impregnates the core structure and binds the diamond grit into the segment. This ensures optimum use of the diamond grit, giving the diamond tools a long product life.

Norton’s Infiltrated High Density technology (i-HDTM) combined with its patented diamond blades laser-welding process is the biggest breakthrough in diamond tools this century. Through many years of research and development this revolutionar process delivers unrivalled performance, increased safety , lower energy manufacturing and a wide choice of segment design. Infiltration achieves high uniform density across each whole segmen t without applying high pressure. This allows Norton Clipper to manufacture extremely robust segments that wear evenly, remain intact and perform wel l at higher cutting speeds. The diamond grit is an integral part of the segment structure. During the patented process a special bond impregnates the core structure and binds the diamond grit into the segment. This ensures optimum use of the diamond grit, giving the diamond tools a long product life The Pro 4x4 Explorer range is even better than before. Faster cutting, longer life, improved safety and greater comfort when used on any material are all additional benefits of this blade. • Multipurpose blade cuts all materials. • Up to 12mm segment height for more cuts per wheel. • Trapezoid shaped segments give a comfortable, smoother cut with lower vibration levels. • Patented cut depth indicator allows better visibility of cut depth when in use. • Keep track of segment wear with the specially engraved wear indicator. • Patented drop shaped gullets prevents fatigue cracks even when cutting thick metal.

Flexible grinding wheels allow the operator working on the metal more flexibility. With more flexibility, it offers more forgiveness. It provides an opportunity to avoid the common bounce and chatter from the machine on the metal that is naturally going to occur. The two most common disc sizes are 4.5” (115mm) and 9” (230mm). Grinders with larger discs are particularly well suited to heavy-duty applications, whereas those with smaller discs are ideal for finer work. TYPE 27. Type 27 is by far the most common abrasive grinding wheel. Type 27 grinding wheels differ from other wheels in that they have a flat profile with a depressed center. A depressed center allows for clearance when the operator must work at a constrained angle. Grinding discs are suitable for metal and stone applications across a range of machine sizes. The main use of such discs is in the removal of materials. However, they can also be used for the finishing and preparation of stone and metal surfaces. Grinding plates come in different standard number sizes (based on diameter size) to match the size grinder you have. Besides the standard number size, grinding plates also come with a variety of hole sizes for making fine , medium, or coarse (chunky) ground meat. For surface grinding, use the flat part of the wheel, maintaining a 20°-30° angle between the tool and the work surface. Position the blade guard at the back toward your body.

Flexible grinding wheels allow the operator working on the metal more flexibility. With more flexibility, it offers more forgiveness. It provides an opportunity to avoid the common bounce and chatter from the machine on the metal that is naturally going to occur. The two most common disc sizes are 4.5” (115mm) and 9” (230mm). Grinders with larger discs are particularly well suited to heavy-duty applications, whereas those with smaller discs are ideal for finer work. TYPE 27. Type 27 is by far the most common abrasive grinding wheel. Type 27 grinding wheels differ from other wheels in that they have a flat profile with a depressed center. A depressed center allows for clearance when the operator must work at a constrained angle. Grinding discs are suitable for metal and stone applications across a range of machine sizes. The main use of such discs is in the removal of materials. However, they can also be used for the finishing and preparation of stone and metal surfaces. Grinding plates come in different standard number sizes (based on diameter size) to match the size grinder you have. Besides the standard number size, grinding plates also come with a variety of hole sizes for making fine , medium, or coarse (chunky) ground meat. For surface grinding, use the flat part of the wheel, maintaining a 20°-30° angle between the tool and the work surface. Position the blade guard at the back toward your body.

Norton’s Infiltrated High Density technology (i-HDTM) combined with its patented diamond blades laser- welding process is the biggest breakthrough in diamond tools this century. Through many years of research and development this revolutionar process delivers unrivalled performance, increased safety , lower energy manufacturing and a wide choice of segment design. Infiltration achieves high uniform density across each whole segmen t without applying high pressure. This allows Norton Clipper to manufacture extremely robust segments that wear evenly, remain intact and perform wel l at higher cutting speeds. The diamond grit is an integral part of the segment structure. During the patented process a special bond impregnates the core structure and binds the diamond grit into the segment. This ensures optimum use of the diamond grit, giving the diamond tools a long product life The Pro 4x4 Explorer range is even better than before. Faster cutting, longer life, improved safety and greater comfort when used on any material are all additional benefits of this blade. • Multipurpose blade cuts all materials. • Up to 12mm segment height for more cuts per wheel. • Trapezoid shaped segments give a comfortable, smoother cut with lower vibration levels. • Patented cut depth indicator allows better visibility of cut depth when in use. • Keep track of segment wear with the specially engraved wear indicator. • Patented drop shaped gullets prevents fatigue cracks even when cutting thick metal.

There are many types of diamond blade, and they have many uses, including cutting stone, concrete, asphalt, bricks, coal balls, glass, and ceramics in the construction industry; cutting semiconductor materials in the semiconductor industry; and cutting gemstones, including diamonds, in the gem industry. It's great on rebar, copper pipe , galvanized pipe, conduit, square steel tube and angle steel. Engineered with the Diamond Cut Advanced Metal Cutting Technology, this RIDGID blade will rip through hard dense metal and mild steel at fast cutting speed and will make quick work of all your metal cutting jobs. The diamond saw blade cores are made from high alloy, heat-treated steel. Depending on the type of blade selected, the steel cores are specifically designed to support the appropriate rim or segment. About the periphery of the core, the various rims or segments are affixed through a brazing or laser welding process. The conventional diamond saw is a metal-alloy disc at 2 to 2.75 inches in diameter, spinning at about 3,000 to 8,000 revolutions per minute. These saws are usually mounted in rows, and controlled by a sawyer or computer so many stones are cut simultaneously. A Diamond Blade is a circular steel disc with a diamond-bearing edge. The edge of the blade may be smooth or textured, continuous rim, or a segmented rim with smaller, individual sections. The blade core is a precision- made steel disc and may have a continuous or slotted rim. Copper is very malleable —it's easy to shape—but it's too soft, not stiff enough, and too weak to make a sword blade. There are alloys of copper that can make a good sword blade, though. Copper exhibits low absorption and high reflectivity of infrared wavelengths, leading to inefficien t laser cutting. Copper's high reflectivity can damage laser optic s equipment. Copper reflects over 95% of infrared radiation when in its solid state. This makes the cutting process unstable and difficult to control.

There are many types of diamond blade, and they have many uses, including cutting stone, concrete, asphalt, bricks, coal balls, glass, and ceramics in the construction industry; cutting semiconductor materials in the semiconductor industry; and cutting gemstones, including diamonds, in the gem industry. It's great on rebar, copper pipe , galvanized pipe, conduit, square steel tube and angle steel. Engineered with the Diamond Cut Advanced Metal Cutting Technology, this RIDGID blade will rip through hard dense metal and mild steel at fast cutting speed and will make quick work of all your metal cutting jobs. The diamond saw blade cores are made from high alloy, heat-treated steel. Depending on the type of blade selected, the steel cores are specifically designed to support the appropriate rim or segment. About the periphery of the core, the various rims or segments are affixed through a brazing or laser welding process. The conventional diamond saw is a metal-alloy disc at 2 to 2.75 inches in diameter, spinning at about 3,000 to 8,000 revolutions per minute. These saws are usually mounted in rows, and controlled by a sawyer or computer so many stones are cut simultaneously. A Diamond Blade is a circular steel disc with a diamond-bearing edge. The edge of the blade may be smooth or textured, continuous rim, or a segmented rim with smaller, individual sections. The blade core is a precision- made steel disc and may have a continuous or slotted rim. Copper is very malleable —it's easy to shape—but it's too soft, not stiff enough, and too weak to make a sword blade. There are alloys of copper that can make a good sword blade, though. Copper exhibits low absorption and high reflectivity of infrared wavelengths, leading to inefficien t laser cutting. Copper's high reflectivity can damage laser optic s equipment. Copper reflects over 95% of infrared radiation when in its solid state. This makes the cutting process unstable and difficult to control.

There are many types of diamond blade, and they have many uses, including cutting stone, concrete, asphalt, bricks, coal balls, glass, and ceramics in the construction industry; cutting semiconductor materials in the semiconductor industry; and cutting gemstones, including diamonds, in the gem industry. It's great on rebar, copper pipe , galvanized pipe, conduit, square steel tube and angle steel. Engineered with the Diamond Cut Advanced Metal Cutting Technology, this RIDGID blade will rip through hard dense metal and mild steel at fast cutting speed and will make quick work of all your metal cutting jobs. The diamond saw blade cores are made from high alloy, heat-treated steel. Depending on the type of blade selected, the steel cores are specifically designed to support the appropriate rim or segment. About the periphery of the core, the various rims or segments are affixed through a brazing or laser welding process. The conventional diamond saw is a metal-alloy disc at 2 to 2.75 inches in diameter, spinning at about 3,000 to 8,000 revolutions per minute. These saws are usually mounted in rows, and controlled by a sawyer or computer so many stones are cut simultaneously. A Diamond Blade is a circular steel disc with a diamond-bearing edge. The edge of the blade may be smooth or textured, continuous rim, or a segmented rim with smaller, individual sections. The blade core is a precision- made steel disc and may have a continuous or slotted rim. Copper is very malleable —it's easy to shape—but it's too soft, not stiff enough, and too weak to make a sword blade. There are alloys of copper that can make a good sword blade, though. Copper exhibits low absorption and high reflectivity of infrared wavelengths, leading to inefficien t laser cutting. Copper's high reflectivity can damage laser optic s equipment. Copper reflects over 95% of infrared radiation when in its solid state. This makes the cutting process unstable and difficult to control.

There are many types of diamond blade, and they have many uses, including cutting stone, concrete, asphalt, bricks, coal balls, glass, and ceramics in the construction industry; cutting semiconductor materials in the semiconductor industry; and cutting gemstones, including diamonds, in the gem industry. It's great on rebar, copper pipe , galvanized pipe, conduit, square steel tube and angle steel. Engineered with the Diamond Cut Advanced Metal Cutting Technology, this RIDGID blade will rip through hard dense metal and mild steel at fast cutting speed and will make quick work of all your metal cutting jobs. The diamond saw blade cores are made from high alloy, heat-treated steel. Depending on the type of blade selected, the steel cores are specifically designed to support the appropriate rim or segment. About the periphery of the core, the various rims or segments are affixed through a brazing or laser welding process. The conventional diamond saw is a metal-alloy disc at 2 to 2.75 inches in diameter, spinning at about 3,000 to 8,000 revolutions per minute. These saws are usually mounted in rows, and controlled by a sawyer or computer so many stones are cut simultaneously. A Diamond Blade is a circular steel disc with a diamond-bearing edge. The edge of the blade may be smooth or textured, continuous rim, or a segmented rim with smaller, individual sections. The blade core is a precision- made steel disc and may have a continuous or slotted rim. Copper is very malleable —it's easy to shape—but it's too soft, not stiff enough, and too weak to make a sword blade. There are alloys of copper that can make a good sword blade, though. Copper exhibits low absorption and high reflectivity of infrared wavelengths, leading to inefficien t laser cutting. Copper's high reflectivity can damage laser optic s equipment. Copper reflects over 95% of infrared radiation when in its solid state. This makes the cutting process unstable and difficult to control.

There are many types of diamond blade, and they have many uses, including cutting stone, concrete, asphalt, bricks, coal balls, glass, and ceramics in the construction industry; cutting semiconductor materials in the semiconductor industry; and cutting gemstones, including diamonds, in the gem industry. It's great on rebar, copper pipe , galvanized pipe, conduit, square steel tube and angle steel. Engineered with the Diamond Cut Advanced Metal Cutting Technology, this RIDGID blade will rip through hard dense metal and mild steel at fast cutting speed and will make quick work of all your metal cutting jobs. The diamond saw blade cores are made from high alloy, heat-treated steel. Depending on the type of blade selected, the steel cores are specifically designed to support the appropriate rim or segment. About the periphery of the core, the various rims or segments are affixed through a brazing or laser welding process. The conventional diamond saw is a metal-alloy disc at 2 to 2.75 inches in diameter, spinning at about 3,000 to 8,000 revolutions per minute. These saws are usually mounted in rows, and controlled by a sawyer or computer so many stones are cut simultaneously. A Diamond Blade is a circular steel disc with a diamond-bearing edge. The edge of the blade may be smooth or textured, continuous rim, or a segmented rim with smaller, individual sections. The blade core is a precision- made steel disc and may have a continuous or slotted rim. Copper is very malleable —it's easy to shape—but it's too soft, not stiff enough, and too weak to make a sword blade. There are alloys of copper that can make a good sword blade, though. Copper exhibits low absorption and high reflectivity of infrared wavelengths, leading to inefficien t laser cutting. Copper's high reflectivity can damage laser optic s equipment. Copper reflects over 95% of infrared radiation when in its solid state. This makes the cutting process unstable and difficult to control.

There are many types of diamond blade, and they have many uses, including cutting stone, concrete, asphalt, bricks, coal balls, glass, and ceramics in the construction industry; cutting semiconductor materials in the semiconductor industry; and cutting gemstones, including diamonds, in the gem industry. It's great on rebar, copper pipe , galvanized pipe, conduit, square steel tube and angle steel. Engineered with the Diamond Cut Advanced Metal Cutting Technology, this RIDGID blade will rip through hard dense metal and mild steel at fast cutting speed and will make quick work of all your metal cutting jobs. The diamond saw blade cores are made from high alloy, heat-treated steel. Depending on the type of blade selected, the steel cores are specifically designed to support the appropriate rim or segment. About the periphery of the core, the various rims or segments are affixed through a brazing or laser welding process. The conventional diamond saw is a metal-alloy disc at 2 to 2.75 inches in diameter, spinning at about 3,000 to 8,000 revolutions per minute. These saws are usually mounted in rows, and controlled by a sawyer or computer so many stones are cut simultaneously. A Diamond Blade is a circular steel disc with a diamond-bearing edge. The edge of the blade may be smooth or textured, continuous rim, or a segmented rim with smaller, individual sections. The blade core is a precision- made steel disc and may have a continuous or slotted rim. Copper is very malleable —it's easy to shape—but it's too soft, not stiff enough, and too weak to make a sword blade. There are alloys of copper that can make a good sword blade, though. Copper exhibits low absorption and high reflectivity of infrared wavelengths, leading to inefficien t laser cutting. Copper's high reflectivity can damage laser optic s equipment. Copper reflects over 95% of infrared radiation when in its solid state. This makes the cutting process unstable and difficult to control.

Suitable for cutting concrete and asphalt Free-cutting and comfortable Long-life, especially in floor sawing applications Prevents early wear of steel-centre when cutting abrasive materials Best safety against segment loss Ensures the product has been tested and validated Suitable for cutting concrete and asphalt Free-cutting and comfortable Long-life, especially in floor sawing applications Prevents early wear of steel- centre when cutting abrasive materials Best safety against segment loss Ensures the product has been tested and validated Suitable for cutting concrete and asphalt Free-cutting and comfortable Long-life, especially in floor sawing applications Prevents early wear of steel- centre when cutting abrasive materials Best safety against segment loss Ensures the product has been tested and validated Suitable for cutting concrete and asphalt Free-cutting and comfortable Long-life, especially in floor sawing applications Prevents early wear of steel-centre when cutting abrasive materials Best safety against segment loss Ensures the product has been tested and validated

There are many types of diamond blade, and they have many uses, including cutting stone, concrete, asphalt, bricks, coal balls, glass, and ceramics in the construction industry; cutting semiconductor materials in the semiconductor industry; and cutting gemstones, including diamonds, in the gem industry. It's great on rebar, copper pipe , galvanized pipe, conduit, square steel tube and angle steel. Engineered with the Diamond Cut Advanced Metal Cutting Technology, this RIDGID blade will rip through hard dense metal and mild steel at fast cutting speed and will make quick work of all your metal cutting jobs. The diamond saw blade cores are made from high alloy, heat-treated steel. Depending on the type of blade selected, the steel cores are specifically designed to support the appropriate rim or segment. About the periphery of the core, the various rims or segments are affixed through a brazing or laser welding process. The conventional diamond saw is a metal-alloy disc at 2 to 2.75 inches in diameter, spinning at about 3,000 to 8,000 revolutions per minute. These saws are usually mounted in rows, and controlled by a sawyer or computer so many stones are cut simultaneously. A Diamond Blade is a circular steel disc with a diamond-bearing edge. The edge of the blade may be smooth or textured, continuous rim, or a segmented rim with smaller, individual sections. The blade core is a precision- made steel disc and may have a continuous or slotted rim. Copper is very malleable —it's easy to shape—but it's too soft, not stiff enough, and too weak to make a sword blade. There are alloys of copper that can make a good sword blade, though. Copper exhibits low absorption and high reflectivity of infrared wavelengths, leading to inefficien t laser cutting. Copper's high reflectivity can damage laser optic s equipment. Copper reflects over 95% of infrared radiation when in its solid state. This makes the cutting process unstable and difficult to control.

There are many types of diamond blade, and they have many uses, including cutting stone, concrete, asphalt, bricks, coal balls, glass, and ceramics in the construction industry; cutting semiconductor materials in the semiconductor industry; and cutting gemstones, including diamonds, in the gem industry. It's great on rebar, copper pipe , galvanized pipe, conduit, square steel tube and angle steel. Engineered with the Diamond Cut Advanced Metal Cutting Technology, this RIDGID blade will rip through hard dense metal and mild steel at fast cutting speed and will make quick work of all your metal cutting jobs. The diamond saw blade cores are made from high alloy, heat-treated steel. Depending on the type of blade selected, the steel cores are specifically designed to support the appropriate rim or segment. About the periphery of the core, the various rims or segments are affixed through a brazing or laser welding process. The conventional diamond saw is a metal-alloy disc at 2 to 2.75 inches in diameter, spinning at about 3,000 to 8,000 revolutions per minute. These saws are usually mounted in rows, and controlled by a sawyer or computer so many stones are cut simultaneously. A Diamond Blade is a circular steel disc with a diamond-bearing edge. The edge of the blade may be smooth or textured, continuous rim, or a segmented rim with smaller, individual sections. The blade core is a precision- made steel disc and may have a continuous or slotted rim. Copper is very malleable —it's easy to shape—but it's too soft, not stiff enough, and too weak to make a sword blade. There are alloys of copper that can make a good sword blade, though. Copper exhibits low absorption and high reflectivity of infrared wavelengths, leading to inefficien t laser cutting. Copper's high reflectivity can damage laser optic s equipment. Copper reflects over 95% of infrared radiation when in its solid state. This makes the cutting process unstable and difficult to control.

Norton’s Infiltrated High Density technology (i-HDTM) combined with its patented diamond blades laser-welding process is the biggest breakthrough in diamond tools this century. Through many years of research and development this revolutionar process delivers unrivalled performance, increased safety , lower energy manufacturing and a wide choice of segment design. Infiltration achieves high uniform density across each whole segmen t without applying high pressure. This allows Norton Clipper to manufacture extremely robust segments that wear evenly, remain intact and perform wel l at higher cutting speeds. The diamond grit is an integral part of the segment structure. During the patented process a special bond impregnates the core structure and binds the diamond grit into the segment. This ensures optimum use of the diamond grit, giving the diamond tools a long product life The Pro 4x4 Explorer range is even better than before. Faster cutting, longer life, improved safety and greater comfort when used on any material are all additional benefits of this blade. • Multipurpose blade cuts all materials. • Up to 12mm segment height for more cuts per wheel. • Trapezoid shaped segments give a comfortable, smoother cut with lower vibration levels. • Patented cut depth indicator allows better visibility of cut depth when in use. • Keep track of segment wear with the specially engraved wear indicator. • Patented drop shaped gullets prevents fatigue cracks even when cutting thick metal.

Remove the blades and give them a thorough clean and replace them on the clipper with plenty of clipper oil or Andis spray. If they are still not cutting, swap to a freshly sharpened or new blade. The majority of hair trimmers come with eight different sizes of guard. The clipper guard AKA haircut number refers to the length of hair that is left after the clipper has been used, with each number representing one eighth of an inch of hair. This means that the lower the number, the shorter the hair, and vice versa. This can be due to corrosion, scratches or general wear. As a result, the cutting edges of the cutter comb of your blades are no longer sharp, reducing their ability to cut. Sharpening the blade is required to reface the cutting surfaces restore these sharp edges. Open the Clipper app or log in to clippercard.com and select “Report Lost or Stolen.” That will deactivate the card, but your balance will stay on your account. You can use the Clipper app to reactivate your card if your phone turns up, or transfer the card to a new phone. The taper lever allows you to change the closeness of your cut between guide comb lengths. Moving the leve r up for a closer cut, and down for a longer cut. This is particularly useful for fading and blending as you can be more precise with you r cutting lengths. If the drive cable is broken or detached, the trimmer head will not spin. To inspect the drive cable, remove the engine assembly from the shaft and look to see if the cable is in its proper place. Reinstall the cable if it has slipped from its place. If the cable is damaged or broken, it should be replaced altogether.

RATED VOLTAGE: 220-250V INPUT POWER: 600W BLOWING RATE: 2.3m/min RATED FREQUENCY: 50Hz NO. LOAD SPEED: 13000r/min

Compact size makes C-Mart M0021 easy to carry, use, preserve and store. C-Mart M0021 1/2" connector has high durability, high hardness, accurate size in millimeters, does not loosen screw heads or get dirty.

High quality 1/2" C-Mart M0024 2-head coupling has a meticulous and modern design, allowing quick and convenient connection with European standard couplings, and simple disassembly with just a a steady and gentle pulling motion. The head of C-Mart M0024 connecting the water wire has many soft plastic clamp slots to help the connector hold the wire firmly and absolutely prevent water leakage. C-Mart M0024 coupling has a connector body protected by a layer of rubber to help prevent all effects of harsh weather conditions.

C-MART A0120-16 general drill bit set 16 parts. C-MART A0120-16 16 general drill bit set is made of high-quality HSS steel alloy, anti-rust, high hardness. C-MART A0120-16 general drill bit set with 16 parts with different sizes, you will have more choices for each purpose

RATCHET HANDLE SLIDING T-BAR EXTRA BAR SPARK PLUG BLOW MOLD SOCKET

COPPER HEAD SPRAY. EASY TO USE SPRAY GUN.

QUICK PLASTIC COUPLER INCLUDED. water pipe quick connector set (4 pieces/packet) 1/2 (12mm) soft tube

C-Mart C0053 28 in 1 multi-function screwdriver set has a connector that can be flexibly shortened or lengthened. C-Mart C0053 is neatly designed, easy to carry, less likely to be scattered or lost.

JAWS MADE OF CHROME VANADIUM STEEL HEAT TREATED. NICKLE PLATED.

C-Mart B0040A-12 is a product widely used in mechanical maintenance, car care and many other industries. B0040A-12 is made from good material so it does not wear out and rust over time, has high hardness, and holding depth can be adjusted. B0040A-12 has a neat design, making storage easier and convenient to carry when needed. Product B0040A-12 is highly durable thanks to being made from CR-V steel with high heat and force resistance...

T-TYPE PLASTIC HANDLE FOR BETTER GRIP, 1/4" DRIVE AND 1/4" BIT HOLDER

CHROME VANADIUM STEEL, MIRROR FINISH

High quality 3/4" C-Mart M0023 2-head coupling has a meticulous and modern design, allowing quick and convenient connection with European standard couplings, and simple disassembly with just a a steady and gentle pulling motion. The head of C-Mart M0023 connecting the water wire has many soft plastic clamp slots to help the connector hold the wire firmly and absolutely prevent water leakage. C-Mart M0023 has a connector body protected by a layer of rubber that helps prevent all effects of harsh weather conditions.

C-Mart B0041A-12 is a product widely used in mechanical maintenance, car care and many other industries. B0041A-12 is made from good material so it does not wear out and rust over time, has high hardness, and holding depth can be adjusted. B0041A-12 has a neat design, making storage easier and convenient to carry when needed. Product B0041A-12 is highly durable thanks to being made from CR-V steel with high heat and force resistance.

JAWS MADE OF CHROME VANADIUM STEEL HEAT TREATED. NICKLE PLATED

The C-Mart M0017 straight (copper) water gun has a one-piece brass nozzle with snap-on adapter and has an additional nozzle adapter. The C-Mart M0017 Straight Water Spray Gun features all brass construction for rust resistance and durability. C-Mart M0017 straight water spray gun can connect 1/2" nozzle and nozzle for better clamping to prevent leakage.

1. ONE PIECE BRASS HOSE NOZZLE WITH 1/2" FAST HOSE ADAPTOR AND WITH ONE ADDITIONAL TAP ADAPTOR. 2.ALL BRASS CONSTRUCTTION FOR RUST RESISTANCE AND DURABILITY. 3. CONNECTING TAP AND 1/2" HOSE TO BE BETTER CLAMPED TIGHT TO AVOID LEAKING. 4.PUSH 1/2" ADAPTOR INTO THE WATER HOSE FULLY AND TIGHTEN IT WITH CLAMP FOR LEAK FREE.

1. 3-PC HOSE NOZZLE SET WITH ONE 3 SECTION ADAPTOR AND ONE SNAP-IN ADAPTOR. 2. ALL BRASS CONTRUCTION FOR RUST RESISTANCE AND DURABILITY.

PUNCHING EDGE FINELY GROUND AND SHARPENED FOR ACCURATE AND DURABLE PERFORMANCE. HIGH CARBON STEEL HEAT-TREATED AND TEMPERED. DENTED GROOVES FOR FIRM GRIP.

C-Mart A0118-08 drill bit is made from high quality alloy C-Mart A0118-08 can be used for many purposes with high durability The C-Mart A0118-08 wood drill bit set has a sharp tip at the tip of the drill bit that serves as a center, preventing the foot from slipping when drilling. C-Mart A0118-08 wood drill bit set includes 8 parts with different sizes, you will have more choices for each different drilling purpose from 3mm to 10mm. The C-Mart A0118-08 wood drill bit set is designed with high-quality materials and meticulous, elaborate machining process. The C-Mart wood drill bit set provides powerful, accurate performance for drilling wooden panels or other materials easily, quickly and effectively. Surely this will be a great assistant to help you save time and maximum effort in every job. C-Mart A0118-08 comes with an accompanying storage box made of plastic, and also has a convenient hanger to help you store the Wood Drill Bit Set easily and neatly.

C-Mart A0118-08 drill bit is made from high quality alloy C-Mart A0118-08 can be used for many purposes with high durability The C-Mart A0118-05 wood drill bit set has a sharp tip at the tip of the drill bit that serves as a center, preventing the foot from slipping when drilling. C-Mart A0118-05 wood drill bit set includes 5 parts with different sizes, you will have more choices for each different drilling purpose including 4,5,6,8,10mm. The C-Mart A0118-05 wood drill bit set is designed with high-quality materials and meticulous, elaborate machining process. The C-Mart wood drill bit set provides powerful, accurate performance for drilling wooden panels or other materials easily, quickly and effectively. Surely this will be a great assistant to help you save time and maximum effort in every job. C-Mart A0118-05 has an included plastic storage box, and also has a convenient hanger to help you store the Wood Drill Bit Set easily and neatly.