Stainless Steel Submersible Bore Hole Pump for 4" & 6" Well Casing
PSS Series
Features
- Optimized hydraulics with efficiency of up to 80%
- Long Service and corrosion resistant
- ACS Certified for domestic hot water applications
- High range of performance from 1 to 250m3/h
- High degree of flexibility
A water pump is used to move,
compress, or transfer water from
a lower level to a higher one.
The main purpose of a water pump
is to transfer water between two points
and to get rid of excess water.
It is often used in construction sites,
tunnels, river beds, residential buildings,
etc.Dry running of the pump can damage
the mechanical seal and the motor.
For this reason, the float switches
should be arranged so that the fill level
in the shaft does not fall below the
minimum level required to operate the pump.
Wells are extremely important to all societies.
In many places wells provide a reliable and ample
supply of water for home uses, irrigation, and industries.
Where surface water is scarce, such as in deserts,
people couldn't survive and thrive without groundwater,
and people use wells to get at underground water.
Texmo Submersible Pumps. If you want to buy a pump,
which is easy to install, easy to maintain,
and is an extremely low weight to power ratio,
then you should consider buying a
Texmo submersible pump.
The boreholes themselves are
generally much narrower and deeper
than a traditional well as a result of modern
techniques. Due to the increased depth,
a water borehole can provide a consistent
and reliable source of water.