RIGHT CUTTING OFFSET SNIPS - 48-22-4022
RIGHT CUTTING OFFSET SNIPS - 48-22-4022 shopping for tin snips, and specifically for aviation snips, you'll notice several types: straight-cut, right-cut and left-cut snips, often marked with yellow, green and red, respectively. Each is suited to specific cutting tasks. The forged steel jaws of these left-cutting or right -cutting snips are set at a 90- degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left or right cuts with either a pushing or pulling motion.Left cut snips are for making to the left and straight cuts. Right cut snips are for making straight and cuts to the right. Straight cut snips (not shown) are for making straight cuts and shallow cuts to the right or left. Right hand tin snips are suitable for cutting straight lines and cutting off in an anti-clockwise direction. Best suited for right handed use. hand tin snips are suitable for cutting off in a clockwise direction and for cutting straight lines. Best suited for left handed use. Types of Tin Sni They are also useful for making long cuts through sheet metal, should you need to. However, you're going to make a long cut through sheet metal, especially a straight one, a pair of snips with offset handles is the way to go. Each color signifies a different direction that the snips are made to cut. Red snips cut left. Yellow snips cut straight or left and right. Green snips cut right. HVAC and sheet metal pros agree: When making long, straight cuts in thinner-gauge sheet metal, tinner snips are the way to go. They're a simple, economical, and durable cutting solution for many sheet metal and HVAC applicatioN.
Old price: ₱1,940.00
₱2,425.00
RIGHT CUTTING OFFSET SNIPS - 48-22-4022
shopping for tin snips, and
specifically for aviation snips, you'll
notice several types: straight-cut,
right-cut and left-cut snips, often
marked with yellow, green and red,
respectively. Each is suited to specific
cutting tasks.
The forged steel jaws
of these left-cutting or right
-cutting snips are set at a 90-
degree angle to allow easy
gripping when cutting sheet metal
in tight spaces or overhead.
The operator can follow tight circular
or square pattern left or right
cuts with either a pushing or
pulling motion.Left cut snips are for making
to the left and straight cuts.
Right cut snips are for making straight
and cuts to the right. Straight cut snips
(not shown) are for making straight cuts
and shallow cuts to the right or left.
Right hand tin snips are suitable
for cutting straight lines and cutting
off in an anti-clockwise direction.
Best suited for right handed use.
hand tin snips are suitable for cutting
off in a clockwise direction and for
cutting straight lines. Best suited for
left handed use.
Types of Tin Sni
They are also useful for
making long cuts through
sheet metal, should you
need to. However,
you're going to make a
long cut through sheet metal,
especially a straight one, a pair
of snips with offset handles is the
way to go.
Each color signifies a
different direction that
the snips are made to cut.
Red snips cut left. Yellow snips
cut straight or left and right. Green
snips cut right.
HVAC and sheet metal
pros agree: When making long,
straight cuts in thinner-gauge
sheet metal, tinner snips are the
way to go. They're a simple, economical,
and durable cutting solution for many sheet
metal and HVAC applicatioN.
